Cannulae Wash
Cannula washing is only available on certain models from the Anthos range. This device allows cannulae to be washed in automatic mode, thus minimising the manual work required of the assistant.
While this is a convenient end-of-work function, it is nevertheless recommended that more in-depth washing be carried out from time to time by detaching the corrugated tubes from the dental unit and soaking them in a basin containing water and an appropriate cleaning fluid.
The cycle start is triggered by inserting the cannula tips in their respective connectors. The cycle is as follows:
• mains water fed intermittently for 50 seconds
• introduction of 10 ml of disinfectant liquid
• suction for another 10 seconds.
Anthos recommends the use of Ster 3 Plus for washing and decontamination of tubing, whether executed manually or automatically. The biphynl-2-olo contained in the product is a wide spectrum disinfectant, active against Gram-positive and Gram-negative bacteria, mycobacteria, fungi and lipophilic viruses. The product also tolerates organic material and hard water.
Concentrated, hygienising fluid for surgical aspiration systems.
High detersive and sanitising power at recommended dilution. Practical in automatic use: diluted with water at 6% in the automatic cannula wash system tank (where applicable).
Effective manual use: diluted with hot water at 6% and slowly aspirated through the cannula, to ensure thorough suction tubing washing.
Aldehyde-free.
|
|
BIOSTER-FLUSHING |
WHE |
SHS |
FLUSHING |
CANNULA WASH |
O.D.R. |
|
Classe A9 |
O |
O |
O |
O |
O |
x |
|
Classe A7 Plus |
O |
O |
O |
O |
O |
x |
|
Classe A6 Plus |
|
O |
O |
|
O |
x |
|
Classe A5 |
|
O |
O |
|
|
x |
|
Classe A3 Plus |
|
O |
O |
|
|
x |
|
Classe R7 |
|
|
x |
O |
O |
x |
|
Classe R7 Modulo |
|
|
x |
|
|
x |
|
Cart |
|
|
O |
|
|
x |
X as standard
O optional